An unlocked bootloader is mandatory if you wish to root your OnePlus 8T, install custom ROMs on it, or perform any sorts of software modifications.
In this guide, we will show you how to easily unlock the bootloader on the OnePlus 8T using a bunch of Fastboot commands. Further, in the next half of this tutorial, we will also guide you on how to relock the bootloader after unlocking it, in case you ever wish to revert your OnePlus 8T to its factory state.
Table of Contents
Introduction
Before we begin with the instructions, let take a quick minute to understand what a bootloader is and why/when would you need to unlock your phone’s bootloader. It’s considered good practice to understand these things and how they work before you actually apply them to your OnePlus phone.
So, what is Bootloader? – The bootloader on your OnePlus 8T is a part of the core Android system that brings up the kernel and is responsible for booting up your phone. Apart from that, it also guards the device state and verifies the boot and recovery partitions to ensure the integrity of your device. You might just consider it as a gatekeeper to the software on your phone.
Most Android devices, OnePlus 8T included, come with a locked bootloader that prevents users from flashing the bootloader or other device partitions. The locked state of the bootloader is further aided by the “OEM unlocking” toggle under “Developer options” so that no one could unlock the bootloader without having full access to the device, especially in case of thefts.
This brings us down to the next major question – Why and when would you need to unlock the bootloader?
Things like gaining root access, installing a custom recovery (TWRP), custom ROMs, etc involve flashing certain device partitions like system, boot, recovery, vendor, etc. And like we mentioned, a locked bootloader does not allow flashing the device partitions at all. So, if you wish to do any of the said modifications, you’d need to unlock your OnePlus 8T’s bootloader first. Moreover, an unlocked bootloader is also required while unbricking your phone by restoring the stock OxygenOS firmware through Fastboot.
With that out of the way, let us now show you how to easily unlock the bootloader on your OnePlus 8T. The only things you will require is your phone, a Windows/Mac/Linux computer, and a compatible USB-C cable.
Before You Begin
Let us take a look at a few things you’ll need to do before you start following the instructions.
1. Take a Backup: The first and foremost thing you should do is take a complete backup of all your important data stored on the phone. Unlocking the bootloader, as well as relocking it, will perform a factory reset and completely erase all the data, including installed apps, messages, contacts, and everything stored in the internal storage.
You could also take a look at our article here on backing up different types of data stored on Android devices.
2. Install Required USB Drivers: Most of the time, your Windows PC will automatically install the required USB drivers for your OnePlus phone. That’s not always the case though, especially when working with things like ADB and Fastboot. So, if you’re operating on a Windows machine, you might want to download and install the official OnePlus USB drivers provided on this page.
If you’re using a macOS/Linux PC, you shouldn’t need any additional drivers at all.
3. Charge your OnePlus phone: If you’re new to things like bootloader unlocking, we strongly suggest that you take your time to understand what each step does.
Having a sufficient battery charge in your OnePlus 8T will ensure that it doesn’t power off while you’re following the instructions and performing them. We suggest charging your OnePlus 8T to a minimum of 40-50% battery level.
How to Unlock the Bootloader on OnePlus 8T
To make it easier for you to understand the whole bootloader unlocking process, we have split the instructions into six (6) major steps. We tried to make the tutorial as comprehensive as possible so that it would be easy to follow by every user, from a novice to a veteran in the field of software modding.
Now, follow the steps below to unlock the bootloader on your OnePlus 8T.
Step 1: Enable OEM Unlocking
The first step of the process is to enable the OEM Unlocking toggle on your phone. Without enabling this option, the bootloader will reject the unlock commands. If you’re interested in knowing what the OEM Unlocking option is and what it does, please refer to the information here.
This option could be located inside the Developer Options screen of your phone. So to begin, enable the hidden Developer Options on your OnePlus 8T first. Then go to ‘Settings‘ → ‘System‘ → ‘Developer options‘ and turn ON the toggle next to “OEM Unlocking“. Finally, select “Enable” when prompted to enable OEM Unlocking on your OnePlus 8T.
- Tip: If OEM unlock is missing or greyed out, make sure that you have logged into your Google account and connected your phone to the internet via WiFi or mobile data.
Step 2: Boot your OnePlus 8T into Fastboot Mode
The Fastboot tool can only interact with your phone for bootloader unlocking or flashing device partitions when it is in a special boot mode known as “Fastboot Mode”.
So, the second step is to boot your OnePlus 8T into Fastboot Mode. To do this, first, hold the power key of your phone to bring up the Power menu and then select “Power” to completely turn off your phone. Then hold the Volume Up, Volume Down, and Power keys together to enter Fastboot Mode.
An alternative/easier way to boot your phone into Fastboot Mode is by using the OxygenOS Advanced Reboot Menu.
Step 3: Set Up Android Platform-tools on your Computer
In order to use the Fastboot tool for unlocking your phone’s bootloader, you must set up the Android SDK platform-tools on your computer.
While you could use one-click ADB/Fastboot installers like Minimal ADB and Fastboot, we recommended doing it the manual way as shown below. This is because one-click installers often include outdated platform-tools binaries, which may cause unusual errors during usage.
So, start by downloading the latest tools package according to your PC’s operating system:
Once you have downloaded the tools, extract the ZIP package to get the “platform-tools” folder. This folder should contain the binary files of the required tools, such as ADB and Fastboot.
For easier access, we suggest you move the “platform-tools” folder to the root of the C:\ drive if you’re using a Windows computer, or inside the “Documents” directory if you’re using a macOS/Linux PC.
Step 4: Launch the Command-line Window
Now that you have the required tools set up, the fourth step is to launch the command-line window inside the working directory (the ‘platform-tools’ folder). If you’re experienced with using the command-line, you could alternatively add the platform-tools to your computer’s PATH.
I have already covered a brief tutorial on how to open ADB/Fastboot command windows inside the Platform-tools folder. Follow the instructions laid down in that tutorial and come back here once done.
Step 5: Connect your phone to the PC and verify the connection
Now that everything is set up properly, your OnePlus 8T is fully ready for bootloader unlocking. To start, connect your phone (while it is in Fastboot Mode) to your computer using a compatible USB-C cable.
Your PC will automatically recognize the phone over the bootloader interface. To verify the connection, enter the following command in the PowerShell/Terminal:
fastboot devicesThe command should return your OnePlus 8T’s unique identifier string and the “fastboot” message as shown in the figure below.
In case it returns a blank output, it means that your computer is not able to detect your phone. This generally happens on Windows, when the computer fails to install the required USB drivers for your OnePlus device. In that case, you would need to download and manually install the OnePlus USB drivers on your Windows PC.
Once you have installed the drivers, restart your PC and issue the Fastboot devices command again. This time, it should identify the phone and return the device ID, as shown in the figure above.
Step 6: Use Fastboot Command to Unlock OnePlus 8T’s Bootloader
Now, it’s time to finally unlock the bootloader on your OnePlus 8T. To initiate the unlocking process, enter the following Fastboot command:
fastboot flashing unlock
As soon as the above command is executed, the phone should display a prompt on the screen. Simply press the Volume keys to move the selector to “UNLOCK THE BOOTLOADER” and press the power key to confirm.
That’s it! Your OnePlus 8T’s bootloader is now fully unlocked and it should automatically boot into the OS. From hereon, you can follow our tutorial on how to root your OnePlus 8T using Magisk.
You will also see the unlocked bootloader warning message during the initial boot process. This is a mandatory warning and completely normal. Do note that the only way to get rid of this warning message is by relocking the bootloader, which is not something you would want to do if you plan on installing TWRP, custom ROMs, rooting the phone, etc.
Relocking the Bootloader on OnePlus 8T
While things like custom ROMs and rooting are great, there are times you may feel like reverting your OnePlus 8T to its factory state by unrooting and installing the stock OxygenOS software. After doing so, you would want to go ahead and also relock your phone’s bootloader.
Locking the bootloader again will ensure the software’s integrity and prevent unauthorized flashing of the software in case it is ever lost or stolen.
Important Note: Before you attempt to lock the bootloader of your OnePlus 8T, it is extremely important to ensure that it has the stock OxygenOS software installed without any sorts of modifications like TWRP, root, custom ROMs, etc whatsoever.
If you’re unsure, we suggest you take a look at our stock firmware restoration guide.
Now, to relock your OnePlus 8T’s bootloader, follow the instructions below.
- First, power off your phone and boot it into Fastboot Mode.
- Connect it to your computer using the USB cable.
- Launch the command-line on your computer using the instructions under step #4 of the unlocking process.
- Enter the following Fastboot command to initiate the bootloader locking process:
fastboot flashing lock
- As soon as the command is executed, you should see a prompt on your phone’s screen. Use the Volume keys to select “LOCK THE BOOTLOADER” and press the power button to confirm and finally relock the bootloader on the OnePlus 8T.
Your phone’s bootloader should now be locked again and it should reboot into the operating system. Since relocking the bootloader factory resets your phone, you will need to set it up again by following the initial setup instructions.
Wrapping Up
So, through this guide, you have learned how to unlock the bootloader on the OnePlus 8T. To recap, an unlocked bootloader is essential if you wish to modify the software on your phone, that is, install a custom ROM, a custom recovery such as TWRP, or root it.
Here’s the link to the tutorial: Root OnePlus 8T using Magisk & Install OxygenOS Updates after Rooting
On the other hand, relocking your OnePlus 8T’s bootloader should be extremely helpful when restoring the stock OxygenOS software and returning your phone to its factory state.
If you have any questions regarding the bootloader on your OnePlus 8T, the process of unlocking or relocking it, feel free to ask us.
Hi,
Will this guide work for the T-mobile version? Because oneplus is saying to get a tmobile “unlock code”, which is 64 digits. I have the tmobile version OnePlus 8, so does that mean I can’t follow this tutorial?
https://www.oneplus.com/support/answer/detail/op588
Kevin, for the T-Mobile variant, you will need to ensure that your phone is SIM unlocked, then retrieve the unlock token from OnePlus, and then use it to unlock the bootloader.
While the regular
fastboot flashing unlockcommand does not apply to your variant, step 1 through step 5 are still valid for you case.For your convenience, here’s how you should go about unlocking the bootloader:
1) Make sure that you have unlocked the SIM card.
2) Follow step 1 of this guide.
3) Retrieve your phone’s IMEI by entering
*#06#in the phone’s dialer and note it down. Pen it down somewhere.4) Follow step 2, 3, 4, and 5 of this guide.
5) Enter the
fastboot oem get_unlock_codein the command-line window.6) The output of the command should your phone’s unique unlock code. Copy the code from the command-line window and save it in a text file.
7) Go to the OnePlus unlock token page, login with your OnePlus account and you will be presented with a form. Input your phone’s IMEI and the unlock code you pulled, as well as your email address where you will receive the unlock token.
8) After you get the unlock token, download it to your computer and move it inside the “platform-tools” folder.
9) Open the command-line window and flash the bin file using the
fastboot flash cust-unlock unlock_token.bincommand. Here “unlock_token.bin” is the full filename and file extension of the token file you received and downloaded.10) Finally, enter the
fastboot oem unlockcommand and the bootloader should be unlocked.I hope this helps you. Let me know if you encounter any problems or have any questions.